Rambery jupiter lamp 3D print night light Remote/Touch/Pat Switch Night light 16 Colors Change Remote LED jupitr light

  • Product name: 3D Printing Jupiter Lamp
  • Material: PLA
  • Production process: 3D printing
  • Light Source: LED
  • Color: A- 2 colors touch ,white light /warm light.
    B- 3 colors touch and tap ,white light /yellow light/warm light.
    C-- 16 colors with remote.
  • Color temperature: 3000K (yellow)/ 6000K(white)
  • Brightness: Stepless adjustment
  • Battery capacity: 1 x 400mAh li-po battery ( built-in )
  • Charging time: 2-4 hours
  • Working time: 8-10hours ( depends on brightness )
  • Power supply: USB DC 5V / 1A
  • Diameter: 10cm 12cm 15cm 18cm 20cm.
  • BUY

    Product Detail

    Product Tags


    This is a novelty desk lamp in a ball shape, and extremely looks like Jupiter especially when turn on the soft white light. Locate it in your space and enjoy the marvellous spectacle about “Jupiter” falling from the starry night.


    How to use:
    1. Touch the metal ring at the bottom of the jupiter lamp to turn on / off the light and change color.
    (Three colors tap :You can pat the jupiter lamp to switch the color of the lights)
    2. Long press the metal ring to adjust the brightness.
    3. Insert the DC connector into the metal ring at the bottom of the jupiter lamp to charge,
    the red light is always on during the charging.The red light will automatically turn off when fully charged.
    4.16colors with 24keys remote can control the moon lamp .
    5.If your hand is too dry or the temperature is too low, the light may not respond.
    6.If the light is not on, you can try charging for 1-2 hours first.
    Or wonder if the brightness of the light is adjusted to the darkest.
    1 x 3D Jupiter Lamp
    1 x Wooden holder
    1 x USB Power Cable
    1 x English Instructions
    1 x Remote? (Only 16 colors jupiter lamp?have)

    2 (6) 2 (1) 2 (2) 2 (3) 2 (4) 2 (5)

  • Previous:
  • Next:

    WhatsApp Online Chat !